RMH DESIGN

M-Mallはモール、ショップ、アートギャラリーなどに適した多目的建造物です。

• エントランスにライト(High､Low 切り替え、夜になったら自動点灯）
• 中央上部にプライベートルームが一部屋(スタッフルーム、オフィスなどにどうぞ）
• エントランスからプライベートルームへのテレポータ
• セントラルコントローラにより、テレポータ・ライトのアクセスコントロールが可能
• フルオリジナルテクスチャ
• 60×60mフットプリント
• 178プリム
• Mod/Copy/No Transfer
• Rezzerによりワンタッチで建てられます。

================================

Lights at the entrance:

Off, low, high
Light up depends on SL sunlight

================================

Central controller:
Full menu driven

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

================================

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

 

S-mall is a multipurpose building which suitable for house, cafe, gallery, small mall, etc.

• Including Brick Dinning Set ( copy enabled version ) and TV /Radio
• Central controller (doors and lights)
• Extra high quality full original textures
• 24×24m footprints
• • Building : 162 prims
  • Brick Dinning Set: 14 prims
  • TV: 4 prim
  • TV & RADIO TUNER: 1 prim
  • All together: 181 prims
• Mod/Copy/No Transfer

Door:
door lock/unlock
Access controller

Chat Commands
/1lock Lock the door
/1unlock Unlock the door
/1resetkeyholders Reset the key holders back to those listed in the notecard
/1listkeyholders List the names of the current key holders via a whisper
/1addkeyholder Add a new key holder to the list
/1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
/1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

================================

Lights:

Off, Red, Yellow
Light up depends on SL sunlight

Central controller:

Full menu driven

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

Doors

• Lock or Unlock doors

Lights

• Set the lights to yellow,red, or turn the lights off

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

TV & Radio

Features
Controls your parcel’s video and radio settings.
You can add or change the stations by editing the config notecard, number limited only by script memory.
Simple dialog-box button interface.

For privately owned land, the TV Radio doesn’t require any special setup. Rez it, click it, and it will give you a menu and allow you to choose from the default stations.
Using the Menu

The first menu displayed will ask you to select between setting the Radio or TV streams, turning either off, or reloading the configuration.

Setting the Radio — This will present you the list of radio stations defined. When you choose one, the radio stream will be set. You will need to click the ‘play’ button in Second Life to hear the radio (as there is no script function to tell your player to start for radio streams.) If you have more than 12 stations defined, a “More” button will be displayed to allow you to page through them.

Turning the Radio Off — This will stop the sound by setting the stream to a blank address.

Setting the Television — This will present you the list of tv stations defined. When you choose one, the “Movies” stream will be set. It will start to play automatically. There can be a significant delay while the stream buffers. If you have more than 12 stations defined, a “More” button will be displayed to allow you to page through them.

Turning the TV Off — This will stop the TV stream.

Reload — This will reload the configuration, so if you change the notecard settings, or change the stations in the notecard, use this to pick up those changes. Also, this will reinitialise the Subwoofer. If you rezzed and then deeded the subwoofer, use the “Reload” button on the TV to tell the subwoofer to set the video texture.

To add your own stations

Open tv radio setup

• radio
  These lines set the Radio URLs. If you do not want to use the radio, do not include any ‘radio’ lines, and the ‘radio’ options will not appear on the menu. Each line should be radio=Name,URL. For example:
  radio=Triple J,http://202.6.74.107:8060/triplej.mp3

• tv
  These lines set the TV (video) URLs. If you do not want to use the tv, do not include any ‘tv’ lines, and the ‘tv’ options will not appear on the menu. Each line should be tv=Name,URL. For example:
  tv=Cartoons,http://www.cartoonsfree.tv/unicast_mov/AFTVCartoonsH264500.mov

• import
  This line points to a text file that contains tv and radio stations. You can remove this if you do not want any of the default stations, and want more room to add your own.

  The TV Radio will re-load the list each day, to pick up any updates.

 

BRICK-Two x Two is a 20×20m footprint small house with furniture. Suitable for both house or shop.

• Furnitures included
• Central controller (teleporters, doors, window and lights)
• Extra high quality full original textures

Door:

• Transform door in entrance and 1st (2nd) floor
• door lock/unlock
• Access controller

Chat Commands

• /1lock Lock the door
• /1unlock Unlock the door
• /1resetkeyholders Reset the key holders back to those listed in the notecard
• /1listkeyholders List the names of the current key holders via a whisper
• /1addkeyholder Add a new key holder to the list
• /1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
• /1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

Window:

Open, medium, private

Teleporters:
Touch TP to each floor

Lights:

Off, green, red
Light up depends on SL sunlight

Central controller:

Full menu driven
Presets
Three preset combinations of Door lock status, window tint level and lighting level. These are:

• Not Home - Doors locked, window open, lights off
• Evening - Doors unlocked, window medium, lights red
• Night - Doors locked, window private, lights green

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

Tints

• Select a tint level for the windows:
  • Open
  • Medium
  • Private

Doors

• Lock or Unlock doors

Lights

• Set the lights to red, green, or turn the lights off

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

Furnitures

furnitures with Japanese influences.

• Zabuton- Japanese floor cushion. 4 sitting animations and 3 sleep animations.
• Tatami restspace - Two sit animations in each edge of restspace.
• MODERN JAPANESE TABLE - center will light up when night comes. It looks like a moon.

20×20m footprints
147 prims (with furnitures), 127 prims (house only )
Mod/Copy/No Transfer

 

PRIMS: 524

FOOTPRINT: 20x 30 METERS

REZ BOX HAS NO PERMISSIONS, BUT YOU ARE ENTITLED TO UNLIMITED BACK UPS AS NEEDED, ONCE IT IS REZZED ALL PARTS ARE COPY/MODIFY (SCRIPTS ARE NO MODIFY)
Old Buidling is a multi-purpose prefab that fits on a 20x 30 square meter area, is made up of 524 prims.

All textures are original.

This extra highly detailed structure, would work great as a unique store, home, mall to display your products or an impressive addition to your sim.

Powered by NDE doors and windows, which allow to change 3 level window shade and lockable door.

Easy rezzing by custom rezzer.

If you would like to purchase this item in-world, please visit RMH DESIGN

Enjoy!

 

Brick Cafe is a part of our Brick Series, complete bundle for cafe including structure and furnitures.
This box contains:

• Brick Cafe ( structure) :124 prims
• Four sets of Witch’s dinning set copy version ( Table and four chair set ): 14 prims each
• 9 Bar stools : 2 prims each
• Bar counter: 22 prims
• Flower and Vase : one prim each

Structure is Mod/ copy, furnitures are Copy.

And Beer Mag is included:-)

• Multi access lockable door by NDE
• Built-in light with Sun Sensor
• Footprints: 26×20m
• Cafe 124 prims, Furnitures 98 prims, Total : 222 prims
• Mod/Copy/ No Transfer (scripts are no mod )

Built -in light will check every 4 minutes to determine if the sun is up or down. If the sun is up, it turns the light off. If the sun is down, it turns the light on. In sims where the sun position is fixed, the light will always be on when this feature is activated. Light up a nearby objects.

 

PRIMS: 150 (3 prims for poseball for the bench of bedroom )

Footprint 25×15.5 or 25 x 21.5 (when expanded )

WITCHCRAFT was inspired by something MAGICAL:-)UNIQUE PREFAB -I made this as a residental, but it could use as a shop/mall.

*Access controllable door by NDE.
*3 level window shade by NDE on bedroom.
*Two original stained glasses

*Windows will open and a terrace will expand by chat command:
/5 roofopen
/5 roofclose
If you would like to purchase this item in-world, please visit RMH DESIGN

 

This is a right entrance 20×10m footprints version of Brick Shop Series.

• Footprints: 20×10m
• 38 prims
• No Mod/ No Copy/ Transfer
• Original textures
• Table for quick display and catch a customer’s eyes.Very good for vendors too:-)
• Two built-in lights with Sun Sensor - Lights will check every 4 minutes to determine if the sun is up or down. If the sun is up, it turns the light off. If the sun is down, it turns the light on. In sims where the sun position is fixed, the light will always be on when this feature is activated.

If you would like to purchase this item in-world, please visit RMH DESIGN

 

This is a left entrance 20×10m footprints version of Brick Shop Series.

• Footprints: 20×10m
• 38 prims
• No Mod/ No Copy/ Transfer
• Original textures
• Table for quick display and catch a customer’s eyes.Very good for vendors too:-)
• Two built-in lights with Sun Sensor - Lights will check every 4 minutes to determine if the sun is up or down. If the sun is up, it turns the light off. If the sun is down, it turns the light on. In sims where the sun position is fixed, the light will always be on when this feature is activated.

If you would like to purchase this item in-world, please visit RMH DESIGN

 

This is a 10×10m footprints version of Brick Shop Series.

• Footprints: 10×10m
• 27 prims
• No Mod/ No Copy/ Transfer
• Original textures
• Table for quick display and catch a customer’s eyes.Very good for vendors too:-)

If you would like to purchase this item in-world, please visit RMH DESIGN

 

PRIMS: 324 ( 328 when rezzed, but 4 prims for markers which can be deleted after rezzing)

It can be rezzed in 2048 sqm parcel, but recommended up to 4096 sqm because of the prims.

OCTAGON was inspired from Tibetan Buddes temple and some kind of Japanese structures. It can be used as a skybox with deleting 8 prims stairs (one linked parts)

*Access controllable door and 3 level window shade by NDE doors and windows.
*Teleporters for each floor
*Easy rezzing by rez box

Mod/Copy/No transfer (scripts and teleporters are no mod)

If you would like to check this item in-world, please visit RMH DESIGN