RMH DESIGN

This is a renewal version of our popular prefab home, Duet !
DUET is two story residental structure for the people who would like to enjoy seaside resort life in SL.

• Central controller (doors and windows) /each floor
• Roof can be open/close by switch, like a piano!
• Extra high quality textures
• Footprints: 25.5x 30.5m
• 153 prims
• Mod/Copy/No Transfer

================================

Door:
door lock/unlock
Lock/ unlock and access list controlled from central controller of each floor

Chat Commands
/1lock Lock the door
/1unlock Unlock the door
/1resetkeyholders Reset the key holders back to those listed in the notecard
/1listkeyholders List the names of the current key holders via a whisper
/1addkeyholder Add a new key holder to the list
/1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
/1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

================================

Central controller:
Full menu driven

• Admin
  • Add, remove and list names.
  • Resend the list to the scripts
  • Reload the controller config (only available to the owner)
• Doors
  • Lock or Unlock doors
• Windows
  • Open
  • Medium
  • Private

================================

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

 

This is a Red version of our popular prefab home, Duet !
DUET is two story residental structure for the people who would like to enjoy seaside resort life in SL.

• Central controller (doors and windows) /each floor
• Roof can be open/close by switch, like a piano!
• Extra high quality textures
• Footprints: 25.5x 30.5m
• 153 prims
• Mod/Copy/No Transfer

================================

Door:
door lock/unlock
Lock/ unlock and access list controlled from central controller of each floor

Chat Commands
/1lock Lock the door
/1unlock Unlock the door
/1resetkeyholders Reset the key holders back to those listed in the notecard
/1listkeyholders List the names of the current key holders via a whisper
/1addkeyholder Add a new key holder to the list
/1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
/1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

================================

Central controller:
Full menu driven

• Admin
  • Add, remove and list names.
  • Resend the list to the scripts
  • Reload the controller config (only available to the owner)
• Doors
  • Lock or Unlock doors
• Windows
  • Open
  • Medium
  • Private

================================

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

 

M-Mallはモール、ショップ、アートギャラリーなどに適した多目的建造物です。

• エントランスにライト(High､Low 切り替え、夜になったら自動点灯）
• 中央上部にプライベートルームが一部屋(スタッフルーム、オフィスなどにどうぞ）
• エントランスからプライベートルームへのテレポータ
• セントラルコントローラにより、テレポータ・ライトのアクセスコントロールが可能
• フルオリジナルテクスチャ
• 60×60mフットプリント
• 178プリム
• Mod/Copy/No Transfer
• Rezzerによりワンタッチで建てられます。

================================

Lights at the entrance:

Off, low, high
Light up depends on SL sunlight

================================

Central controller:
Full menu driven

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

================================

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

 

Sextet（六重奏）は6階建てのコンドミニアムです。

• 各階に独立したセントラルコントローラー
• 各フロアにテレポータ
• セントラルコントローラによるアクセスコントロール付きのドア
• 窓は､セントラルコントローラからOpen Medium Privacyの三段階切り替え
  プライバシーモードでは外からは見えず中からは見える
  マジックミラーのような状態になります
• ハイクオリティなオリジナルテクスチャ
• フットプリント25.5×30.5m
• 367プリム
• Mod/Copy/No Transfer

================================

Door:
door lock/unlock
Lock/ unlock and access list controlled from central controller of each floor

Chat Commands
/1lock Lock the door
/1unlock Unlock the door
/1resetkeyholders Reset the key holders back to those listed in the notecard
/1listkeyholders List the names of the current key holders via a whisper
/1addkeyholder Add a new key holder to the list
/1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
/1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

================================

Central controller:
Full menu driven
~~~~~~~~~~~~~~~~~~~~~~~~~
Admin
– Add, remove and list names.
– Resend the list to the scripts
– Reload the controller config (only available to the owner)
~~~~~~~~~~~~~~~~~~~~~~~~~
Doors
– Lock or Unlock doors
~~~~~~~~~~~~~~~~~~~~~~~~~
Windows
–Open, Medium,Private
================================

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

================================

If you would like to check this item in-world, please visit RMH DESIGN!

 

S-mall is a multipurpose building which suitable for house, cafe, gallery, small mall, etc.

• Including Brick Dinning Set ( copy enabled version ) and TV /Radio
• Central controller (doors and lights)
• Extra high quality full original textures
• 24×24m footprints
• • Building : 162 prims
  • Brick Dinning Set: 14 prims
  • TV: 4 prim
  • TV & RADIO TUNER: 1 prim
  • All together: 181 prims
• Mod/Copy/No Transfer

Door:
door lock/unlock
Access controller

Chat Commands
/1lock Lock the door
/1unlock Unlock the door
/1resetkeyholders Reset the key holders back to those listed in the notecard
/1listkeyholders List the names of the current key holders via a whisper
/1addkeyholder Add a new key holder to the list
/1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
/1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

================================

Lights:

Off, Red, Yellow
Light up depends on SL sunlight

Central controller:

Full menu driven

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

Doors

• Lock or Unlock doors

Lights

• Set the lights to yellow,red, or turn the lights off

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

TV & Radio

Features
Controls your parcel’s video and radio settings.
You can add or change the stations by editing the config notecard, number limited only by script memory.
Simple dialog-box button interface.

For privately owned land, the TV Radio doesn’t require any special setup. Rez it, click it, and it will give you a menu and allow you to choose from the default stations.
Using the Menu

The first menu displayed will ask you to select between setting the Radio or TV streams, turning either off, or reloading the configuration.

Setting the Radio — This will present you the list of radio stations defined. When you choose one, the radio stream will be set. You will need to click the ‘play’ button in Second Life to hear the radio (as there is no script function to tell your player to start for radio streams.) If you have more than 12 stations defined, a “More” button will be displayed to allow you to page through them.

Turning the Radio Off — This will stop the sound by setting the stream to a blank address.

Setting the Television — This will present you the list of tv stations defined. When you choose one, the “Movies” stream will be set. It will start to play automatically. There can be a significant delay while the stream buffers. If you have more than 12 stations defined, a “More” button will be displayed to allow you to page through them.

Turning the TV Off — This will stop the TV stream.

Reload — This will reload the configuration, so if you change the notecard settings, or change the stations in the notecard, use this to pick up those changes. Also, this will reinitialise the Subwoofer. If you rezzed and then deeded the subwoofer, use the “Reload” button on the TV to tell the subwoofer to set the video texture.

To add your own stations

Open tv radio setup

• radio
  These lines set the Radio URLs. If you do not want to use the radio, do not include any ‘radio’ lines, and the ‘radio’ options will not appear on the menu. Each line should be radio=Name,URL. For example:
  radio=Triple J,http://202.6.74.107:8060/triplej.mp3

• tv
  These lines set the TV (video) URLs. If you do not want to use the tv, do not include any ‘tv’ lines, and the ‘tv’ options will not appear on the menu. Each line should be tv=Name,URL. For example:
  tv=Cartoons,http://www.cartoonsfree.tv/unicast_mov/AFTVCartoonsH264500.mov

• import
  This line points to a text file that contains tv and radio stations. You can remove this if you do not want any of the default stations, and want more room to add your own.

  The TV Radio will re-load the list each day, to pick up any updates.

 

BRICK-Two x Two is a 20×20m footprint small house with furniture. Suitable for both house or shop.

• Furnitures included
• Central controller (teleporters, doors, window and lights)
• Extra high quality full original textures

Door:

• Transform door in entrance and 1st (2nd) floor
• door lock/unlock
• Access controller

Chat Commands

• /1lock Lock the door
• /1unlock Unlock the door
• /1resetkeyholders Reset the key holders back to those listed in the notecard
• /1listkeyholders List the names of the current key holders via a whisper
• /1addkeyholder Add a new key holder to the list
• /1latch Lock the door open until /unlatch is issued. (Door must first be open for this to work)
• /1unlatch If door is latched open, unlatch it. It will close when touched or after the time set by closedelay.

Window:

Open, medium, private

Teleporters:
Touch TP to each floor

Lights:

Off, green, red
Light up depends on SL sunlight

Central controller:

Full menu driven
Presets
Three preset combinations of Door lock status, window tint level and lighting level. These are:

• Not Home - Doors locked, window open, lights off
• Evening - Doors unlocked, window medium, lights red
• Night - Doors locked, window private, lights green

Admin

• Add, remove and list names.
• Resend the list to the scripts
• Reload the controller config (only available to the owner)

Tints

• Select a tint level for the windows:
  • Open
  • Medium
  • Private

Doors

• Lock or Unlock doors

Lights

• Set the lights to red, green, or turn the lights off

The Admin Menu

Adding a keyholder

Touch the controller to pull up the menu, then select Add. The controller will prompt you to type names. Type each name into chat, one name per line. The controller will keep adding the names you type until you type the word ‘done’ on a blank line of chat.

It will only listen to you - the person who put it into “add” mode. If you type something that can’t be a name in SL, for example a single word, or more than two words on a line, your entry will be rejected. If you try to add someone who’s already on the list, you’ll be told that person’s already a keyholder. If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the list entered so far, and go back to ‘idle’ mode.

Removing a keyholder

Touch the controller to pull up the menu, then select Remove. The controller will list all the current keyholders, preceeding each with an index number. Type the index number of the name you’d like to remove. The controller will remove that name from the list, and re-list the names. Continue until you’ve removed all the names you want, then type ‘done’ on a blank line of chat.

If you don’t make a valid entry in 60 seconds, the controller will timeout, broadcast the current list of keyholders, and go back to ‘idle’ mode.

Listing the keyholders

Touch the controller to pull up the menu, then select List. The controller will list the current keyholders.

Restoring the original keyholders

Touch the controller to pull up the menu, then select Reload. The controller will reload the list of keyholders from its notecard, and remove all the ones manually entered through chat. Note, so that rental tenants don’t hit Reload and get themselves removed from the access list, this option is available only to the controller’s Owner.

Resending the Keyholders

Sometimes you will reset the script of a door or other device, and want to resend the keyholder list out from the controller without changing it. Use the Resend button to do this.

Furnitures

furnitures with Japanese influences.

• Zabuton- Japanese floor cushion. 4 sitting animations and 3 sleep animations.
• Tatami restspace - Two sit animations in each edge of restspace.
• MODERN JAPANESE TABLE - center will light up when night comes. It looks like a moon.

20×20m footprints
147 prims (with furnitures), 127 prims (house only )
Mod/Copy/No Transfer

 

リアルで美しい噴水。
L,M,S,SSの4サイズが入っています。

• L 8m
• M 4.994m
• S 2.749m
• SS 0.934m

柱をタッチすると、レッドブルーグリーンの三色に照明が切り替わります。

リアルな噴水のサウンド入り。
水をタッチするとメニューから、以下の項目がコントロールできます：

• ボリューム
• 3Dカットオフ（東西南北それぞれで音の届く範囲をコントロール）
• プレイバック（昼、夜、両方）
• メニューアクセス権限（オーナー、グループ）

タッチする場所は下の写真をご覧ください：

5 prims each
No Mod/NoCopy/Transfer

===========
Menu Controls

Main Menu

Volume - Set a new volume level

3D Cut Off - Add or change 3D audible distance ranges to keep the sound effects inside or outside certain areas.

Playback - Set the playback style to Forever (default), Day Only, or Night Only.

Access - Set the control access to Owner (default) or Group. If set to Group and the object does not have a group set, access is considered “anyone”.

Volume

Select a new volume level.

0 - Muted
1 - Minimum
10 - Maximum (default)

3D Cut-Offs

All six directions have their own selectable cut-off distance. This function is perfect for keeping audio inside a room or specific level. It can also be used to keep sounds outside a building.

Directions - Top (up), North, Bottom (down), West, South, and East. The next menu will be displayed.
Restore - Reverts all six directions back to maximum (MAX).
Report - Displays the current settings for all six directions.

Distance Menu 1

Select the audible distance. Choices are 1 to 10 meters.

Next - Displays the next page of options. (11 to 20 meters)
Back - Move back one menu.

Distance Menu 2

Select the audible distance. Choices are 11 to 20 meters.

Max - Reverts the selected distance back to the maximum distance.
Back - Returns to main menu.

Playback Style

Select your desired playback style.

Day Only - Audible effects play only during the SL day.
Night Only - Audible effects play only during the SL night.
Both - Audible effects play constantly day and night. (Default setting)

Access Control

Select Access Control

Owner - Only the owner can change sound settings. (default setting)
Group - Group members can change sound settings. Object must be associated to a group. If no group is set, access is open to anyone.

 

元はといえばRMH DESIGNのスタッフ用に作ったアバターです。
装着方法：
箱をOpenでインベントリにフォルダができたら、
そのフォルダを右クリックでReplace Outfitを選ぶと一発で装着できます。

100L$